Seal Coating Process

• Custom measurements with all grass surfaces removed. Grass trimming provided. Sealant to be applied to driveway surface only.
• Area is sealed off to prevent access.
• All stains removed prior to sealing. We use steel brushes to remove dirt and debris before coating is applied. A blower is also used to remove excess.
• Masking tape is applied to sidewalk and walls to prevent overspray.
  
• All cracks are repaired before spraying with a heavy-duty sealant.
  
• Apply sealant using commercial grade sprayers for a long-lasting finish.
  
• Wait at least 24 hours and surface will be dry and ready to use.
  

top